Product Details:
|
OE NO.:: | 58101-2VA10/D1543 | Material: | Ceramic, Semi-Metallic, Organic |
---|---|---|---|
Dust Level: | Low | Color: | Black Or As Shown |
Price Range: | Affordable | Friction Coefficient: | High |
Warranty: | 1 Year | Noise Level: | Low |
Highlight: | Auto Brake Pads 58101-2VA10,D1543 Car Brake Accessories |
Auto Brake Pads Ceramic Semi-Metallic 58101-2VA10/D1543 Car Accessories Brake Pad For Hyundai
Brake pads are held in place within the caliper or shoe assembly by adding some clamping force, which is easily applied from the clips, springs, or screws. To ensure reliable clamping force, the correct highly precise level of torque should be met.
The wear indicator holes are molded into the pad body for wear determining. As the pad material becomes thinner due to friction, the holes are gradually revealed, which could be picked up by the sensors, to indicate when there is a need to replace the pads.
Every type of brake pad has its own materials, including abrasives like copper, fiber, quartz, or silicon carbide making up the friction and various binders holding these pieces together and allowing the friction to be adjusted with the right characteristics such as the bite point, dust, and wear rate.
Dot codes on the pads can be used to identify its manufacture, compound type, date of manufacture, and in some cases even the corresponding vehicle application. This helps to determine the right replacement pads for specific vehicles.
For instance, an improvement of the brake for extreme stopping power can be made with the addition of racing-type materials such as sintered metal due to their quick and effective way of stopping any vehicle, which unfortunately can cause them wear quickly. There is also the availability of brake pads with drilled holes, contributing to an improved cooler rotor.
Ceramic pads have a lot less dust than semi-metallic pads due to the hard-wearing binders, despite being prone to cracking, especially when subjected to harsh braking or side-stepped from the conventional bedding process.
These days, special low-dust versions of pads are being used that contain compounds reducing the abrasive effects of the pad material and cutting down on the particles that rust the wheels and corrodes the undercarriage in the long-term.
In order to function properly, it is important for the pads to undergo bedding process that allows new pads to deposit a transferring friction layer onto the rotors, avoiding unpredictable actions and any issues with the brake feel.
Pad Retention
Pads are installed into the caliper or shoe assembly with retention clips, springs, or screws. The clamping force must be within the correct torque value for them to be reliable.Indicator Holes
The pad body includes wear indicator holes to signal when replacement of the pad material is needed. As the material wears away, the holes ultimately align with sensors.Pad Compounds
The pad compounds contain abrasives, such as copper, fiber, quartz, and silicon carbide, which are used to cause friction. These abrasives are held together by the use of binders. Different formulations control distinct characteristics, such as bite point, dust, and even wear rate.Dot Codes
Dot codes on the pads are used to identify the manufacturer, the type of compound, and the date of manufacture. In some cases, the vehicle application is also outlined. This helps to ensure that the right replacement pads are used.Performance Pads
Performance pads use advanced materials, such as sintered metal for extreme stopping power but with quicker wear. In some instances, drilled holes are integrated as well for better rotor cooling.Ceramic Pads
Ceramic pads produce less dust than semi-metallics because of stronger binders. However, if the bedding process is not done correctly or the brake is used harshly, the pads may be more prone to cracking.Low-Dust Pads
Low-dust or "green" pads also contain compounds that help to reduce the abrasion of the pad material. This helps to reduce the amount of particles that cause rust on wheels and corrosion on the undercarriage.Bedding
The bedding of new pads is essential for the successful breaking in and leaving a transferring friction layer on the rotors. This helps to guarantee stable action and brake feel.Model NO. | 58101-2VA10(D1543) | Type: | Brake Pads |
Material: | Semi-Metal | Position: | Front |
Color | Accept Customized | Classify | The Braking System |
Accessory | Shims + Sensors +Other Accessories | Classification | Disc |
Certification: | ISO9001 | Warranty: | 30000km |
Specification | 132.8*60*16.8(mm) | After-sales Service: | 1 Years |
Transport Package | Neutral packing | Origin | China |
Sample | Available | Production Capacity | 200000pieces/Year |
HS Code | 8708301000 | Applicable models | KIA,Hyundai |
It's important to lubricate the caliper slider pins/bolts with a high-temperature brake grease before inserting in order to prevent squeaking and corrosion.
It's important to ensure anti-rattle clips or retainers are fully engaged to avoid noise or pad movement issues in the future.
To make sure the pads are correctly oriented, make sure to place it so the friction material always faces the rotor/brake disk surface.
If two-piston sliding calipers are being installed, consider using a pneumatic or C-clamp tool to carefully retract pistons to avoid separation issues. Additionally, applying small amounts of silicone-based grease to the pad backplate surface contacting the piston can reduce future squealing.
It's important to consider replacing pad hardware, like springs/clips, if they are worn in order to ensure proper clamping force on the new pads.
If applicable, use the correct torque specifications when installing any screws or bolts that are securing pads or caliper components.
Inspect rotor surfaces for any signs of excessive wear, cracks, rust or deposits, and replace or resurface if necessary to prevent vibration.
Follow bed-in procedures outlined by the pad manufacturer to establish a proper friction layer and consistent braking.
Check pad-to-rotor clearance after installation to confirm there is no interference or dragging that could cause damage.
Finally, rebleed the brakes if any air entered the system during piston retraction to ensure a firm pedal.
Brake Pad For HONDA | ||||
43022-SM4-G00 | 43022-TA0-A00 | 45022-S30-G10 | 45022-S2P-000 | 43022-SJA-000 |
45022-SM4-A00 | 45022-STX-A00 | 43022-S04-E01 | 45022-SMG-E00 | 45022-SJA-010 |
45022-S6D-E01 | 43022-SZA-A00 | 45022-SM2-000 | 43022-SL0-E50 | 45022-SJC-A00 |
45502-SH3-G30 | 45022-SZA-A00 | 45022-S1A-E02 | 06450-SFC-000 | 43022-SJC-A00 |
45022-SB0-505 | 45022-TK6-A00 | 43022-S1A-E02 | 45022-SD4-A10 | 43022-S0X-A00 |
43022-SG9-000 | 45014-SAD-M02 | 06450-S5D-A01 | 45022-SA0-020 | 45022-SF0-600 |
45022-634-670 | 45022-T5R-A01 | 45022-S1A-E61 | 45022-SB2-780 | 45022-S7A-N00 |
04491-12141 | 45022-S0X-020 | 45022-S3V-A10 | 45022-SE0-505 | 43022-SWW-G01 |
45022-634-003 | 58101-32300 | 45022-SM2-010 | 43022-SD2-930 | 45022-SWW-G01 |
45022-671-305 | 45022-SH3-903 | 45022-S9A-A00 | 43022-SG0-G01 | 06430-SFE-000 |
55210-78460 | 45022-TL2-A00 | 06450-S34-000 | 06450-S2G-000 | 45022-TSE-K00 |
45021-693-601 | 45022-TP6-A60 | 45022-SEA-E01 | 45022-504-V10 | 43022-TRT-A00 |
45022-SA0-680 | 45022-TJ0-M01 | 43022-S9A-010 | 43022-S04-E02 | 45022-TVC-A02 |
45022-SA0-660 | 45022-TL0-G50 | 43022-SMG-E01 | 45022-SG0-010 | 43022-SHJ-A00 |
45022-SA0-681 | 45022-TL1-G01 | 43022-SE0-S01 | 45022-S1A-E20 | 43022-TVA-A03 |
45022-SA5-670 | 45022-SJA-E00 | 45022-SHJ-A00 | 43022-T7J-H01 | 43022-TV0-E01 |
43022-SA5-506 | 45022-SJP-A00 | 45022-ST7-000 | 45022-T3L-A00 | 43022-SG9-V00 |
43022-SA5-950 | 43022-SZA-A10 | 45022-SD5-000 | 43022-TBA-A02 | 45022-THR-A01 |
45022-SA3-G10 | 45022-TR3-A00 | 45022-S2C-020 | 45022-TLA-A01 | 45022-SEP-A60 |
45022-SB6-600 | 45022-TG1-T00 | 45022-S2A-E01 | 43022-TLA-A00 | 45022-TV2-E01 |
45022-SG9-000 | 45022-T2G-A00 | 45022-S5B-J00 | 45022-S6M- J52 | 45022-SG9-V00 |
Q: What's your MOQ?
A: MOQ usually is 20 pieces. (depend on which products you need)
Q: What's your Payment terms?
A: 30% deposit, 70% balance payment before shipment.
Q: What payment method you accept?
A: Bank Tranfer, T/T, Credit Card, PayPal. Western Union.
Q: How do you control your quality?
A: All products were produced in high standards, and has passed component tests, unfinished tests and 100% products testing before delivery.
Q: How do you ship goods?
A: if you have shipping agent in China, we can send goods to your agent warehouse. If don't have agent, we will long cooperated shipping company, you can choose by DHL, Fedex, or UPS. or shipping by sea, we will give you several solutions to choose.
Q: Can we customized the length, size or with different materials?
A: Yes, we will try our best to meet most of your needs.
Q: Can you produce the same product as mine if I provide you a sample?
A: Yes, we are capable of producing the electric parts for the most products.
Q: Can you provide me free sample first?
A: It depends on the sample's cost, normally we can, but client need to pay the shipping cost.
Contact Person: Coral Cheng
Tel: +8615572808708
Fax: 86-155-7280-8708