|Model NO:||54830-0U000||Cold Style:||Water-cooled|
|Max Pipe Diameter||NORMAL|
|Place of Origin||Beijing, China|
|Car Model||I20/SOLARIS/KIA RIO 2014|
|Product name||Front Stabilizer Links|
|Application||I20/SOLARIS/KIA RIO 2014|
|Applicable car brand||Hyundai;Kia|
|Car model||I20/SOLARIS/KIA RIO 2014|
|DELIVERY TIME||10-30 Days|
A stabilizer link consists of a metal rod with threaded ends and ball joints or bushings at each end. The rod is typically made of steel or aluminum to provide strength and durability. The length of the stabilizer link can vary depending on the vehicle's suspension design and the location of the sway bar.
The stabilizer link connects the sway bar to the suspension components, such as the control arm or strut. One end of the link is attached to the sway bar through the ball joint or bushing, while the other end is connected to the suspension component using a ball joint or bushing as well.
The ball joints or bushings at each end of the stabilizer link allow for articulation and flexibility as the suspension moves up and down. They also provide a pivot point for the sway bar, allowing it to effectively transfer forces between the left and right sides of the vehicle.
The stabilizer link's primary function is to transmit the forces and movements between the suspension and the sway bar. During cornering or when one side of the vehicle encounters an uneven surface, the stabilizer link helps to resist the body roll and keeps the vehicle stable. It helps distribute the load evenly between the wheels, improving traction and handling.
Over time, stabilizer links can wear out or develop play in the ball joints or bushings, leading to increased body roll, noise, or a loose suspension feel. In such cases, the stabilizer links may need to be replaced to restore proper suspension performance and stability.
It's important to note that the design and configuration of stabilizer links can vary depending on the vehicle make, model, and suspension system. Some vehicles may have front and rear stabilizer links, while others may have multiple links per axle. Additionally, aftermarket stabilizer links may offer performance enhancements or adjustable features for specific driving preferences or suspension setups.
Stabilizer links are typically built with durable materials such as steel, aluminum, or high-strength alloys, providing strength and resistance to the stresses of use. On either end, ball joints or bushings are used for articulation and flexibility, and depending on the desired characteristics, they may be made of rubber, polyurethane, or metal. Some aftermarket stabilizer links may offer adjustability features, allowing for customizable lengths or multiple mounting holes. Additionally, some come with grease fittings, also known as zerk fittings, to promote smoother movement and increase the lifespan of the link. To handle exposure to elements like road salt and moisture, Stabilizer links can feature corrosion-resistant coatings or materials. The links are designed as direct replacements to match the precise dimensions of the original part for easy installation. For added assurance, one may opt for brands known for their quality and reliability. These manufacturers typically provide stabilizer links that have undergone rigorous testing and quality control processes.
Length: Stabilizer links have a specified length that determines the distance between the mounting points on the sway bar and suspension components. This is crucial for proper fitment and alignment with the vehicle's suspension system.
Thread Size: Stabilizer links have threaded ends that connect to the sway bar and suspension components. Matching the thread size of the stabilizer link to the corresponding mounting points on the vehicle is of utmost importance.
Ball Joint or Bushing Size: Stabilizer links feature ball joints or bushings at each end, connecting to the sway bar and suspension components. The size of these pieces needs to be compatible with the vehicle in order to ensure a safe and reliable connection. Dimensions such as inner diameter, outer diameter, or specific mounting requirements need to be considered.
Material: Stabilizer links are typically made of steel, aluminum, or high-strength alloys. The material chosen affects factors such as strength, durability, and weight. Some aftermarket manufacturers offer various material options to cater to performance or weight needs.
Grease Fitting: Some stabilizer links may include grease fittings (zerk fittings) for lubrication. It is important to note the size and location of the fitting in order for it to be compatible with standard grease guns and for maintenance to be done with ease.
Corrosion Resistance: Stabilizer links may feature corrosion-resistant coatings or materials to protect against rust and corrosion caused by exposure to moisture, road salt, and debris. How much of this protection offered largely depends on the quality of the stabilizer link and the terrain in which it will be used.
OE Equivalency or Fitment: Many aftermarket stabilizer links are designed to be direct replacements for the original equipment. It is important to double-check that these links fit the specific vehicle make, model, and year in order to maintain the suspension system integrity and performance.
Load Capacity: Stabilizer links must be able to handle the forces and loads generated during vehicle operation. To guarantee safety and reliability, the load capacity or weight rating of the stabilizer link must meet or exceed the requirements of the vehicle.
|后刹车片rear brake pad||58302-1RA30|
|前刹车片front brake padpad||58101-1RA00|
|机油滤清器 oil filter||26300-35505|
|内后视镜总成Interior rearview mirror assembly||85101-3X100|
Interior rearview mirror assembly
valve cover gasket
|水箱散热器盖water tank radiator cover||25330-1P000|
crankshaft oil seal
Piston ring assembly
triangular ribbed belt
|三角多楔带惰轮V-ribbed belt idler pulley||25288-25001|
|水箱冷却水管Water tank cooling water pipe||25460-2G201|
|冷却水管法兰(节温器罩)Water tank cooling water pipe||25620-2B003|
|发动机机油冷却器Engine oil cooler||26410-2G000|
|点火线组件Ignition wire assembly||27501-26D00|
At Hyundai Kia, we take great care in making sure our customers receive their spare parts in the best condition possible. We package our spare parts with durable protective materials to prevent damage during shipping. We also employ shipping and delivery methods that ensure timely and safe delivery.
Our packaging materials include reinforced cardboard boxes and bubble wrap. All of our packages are sealed with tape for extra protection. We also provide special packaging for fragile items such as glass or ceramic parts.
We ship our spare parts using reliable courier services such as UPS, FedEx, and DHL. We also offer our customers the option of express shipping for faster delivery. All of our shipments are insured for added security. We also provide tracking numbers for all shipments so our customers can easily check the status of their orders.
At Hyundai Kia, we take pride in our ability to deliver our spare parts safely and securely. Our commitment to quality packaging and shipping ensures that our customers receive their orders on time and in perfect condition.
Q1: Can I have a sample order?
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2:What’s your MOQ?
MOQ is 100 sets for each item,2,000 sets for total order.
Q3: What are your trade terms?
Payment term: TT, 30% deposit before production, 70% balance before shipment.
Q4: What is the lead time?
Samples need 7working days, mass products need 45 days.
Q5: How do you ship the goods and how long does it take arrive?
We usually ship by DHL, UPS, FedEx or TNT for sample. Air and sea ship is acceptable. It usually needs 7 days to arrive except sea
Q6: How to precede the order if I have logo to print and own color box?
Firstly, we will prepare artwork for visual confirmation, and next we will produce a real sample for your second confirmation. If
mockup is ok, finally we will go to mass production.
Secondly ,for color box: firstly you can send your drawing or we help you to draw and provide color boxes pictures for you to choose; And
next we confirm with the box supplier and they will give us final drawing.
Thirdly, we send you final drawing for you to check and then print it out. We will send color boxes to you for final confirmation
and then begin mass production.
Q7. Do you test all your goods before delivery?
Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Contact Person: Mrs. Coral Cheng