81260-1W220DCT Car Ventilation Tailgate Lock Hyundai Kia Spare Parts

Product Description:

The tailgate release switch is a component found in vehicles with a rear tailgate or trunk. It is a switch or button located either on the interior cabin or the exterior of the vehicle near the rear, and its primary function is to release or unlock the tailgate, allowing it to be opened.

Here are some key points about the tailgate release switch:

• Location: The tailgate release switch is typically positioned within convenient reach of the driver or passengers. It can be found on the dashboard, center console, door panel, or in some cases, integrated into the key fob or a dedicated button on the tailgate itself.
• Electronic Activation: The switch is an electronic device that sends a signal to the vehicle's central locking system or tailgate actuator to release the lock mechanism holding the tailgate closed. Upon activation, the switch completes a circuit, triggering the unlocking action.
• Wiring and Connectivity: The tailgate release switch is connected to the vehicle's electrical system through wiring harnesses. This allows for the transmission of the electrical signal from the switch to the appropriate components responsible for unlocking the tailgate.
• Safety Precautions: In many vehicles, the tailgate release switch is designed to operate only when specific conditions are met, ensuring safety. For example, the switch may require the ignition to be turned on, the vehicle to be in park mode, or the doors to be unlocked before it can be activated.
• Integration with Central Locking System: The tailgate release switch is often integrated into the vehicle's central locking system, which controls the locking and unlocking of all doors, including the tailgate. This integration allows for synchronization between the tailgate release and the other door locks in the vehicle.
• Additional Features: Some vehicles may have additional features associated with the tailgate release switch. For instance, a power tailgate release switch may enable the automatic opening and closing of the tailgate with the push of a button, without the need for manual lifting.

It's important to note that the design and functionality of the tailgate release switch can vary between different vehicle models and manufacturers. Therefore, the specific features and location of the switch may differ from one vehicle to another.

Features:

Technical Parameters:

The voltage rating of a switch typically specifies the maximum voltage that it can safely handle in volts (V), which provides information about the power supply required for proper functioning. Additionally, it is important to understand the current rating of the switch, which is usually measured in amperes (A). This rating indicates the maximum amount of current the switch can handle without experiencing damage or malfunction, providing information about the electrical load capacity.

The contact configuration refers to the number and arrangement of electrical contacts within the switch and determines the circuit connections made when the switch is activated. Common contact configurations are single-pole, single-throw (SPST), single-pole, double-throw (SPDT), etc. The switching mechanism refers to the internal mechanism used by the switch to make and break electrical connections. This could be mechanical (e.g. a button or lever) or electronic (e.g. relying on sensors or touch-sensitive panels).

The operating temperature range of the switch is another important parameter to consider. It specifies the temperature limits within which the switch can function reliably. Additionally, the IP (Ingress Protection) rating should be checked to determine the level of protection offered against the intrusion of solid objects and liquids. Finally, the durability and lifecycle of the switch refer to its expected operational lifespan, indicating the amount of activations it can endure before potential wear or failure. Moreover, the connection type of the switch describes how it is connected to the vehicle's electrical system.
 

Applications:

In reality, the usage of the tailgate release switch depends on the specific design and features of the vehicle. Here's a general overview of how the tailgate release switch is typically used:

Locating the Switch: Identify the location of the tailgate release switch. It can be located on the interior of the vehicle, such as on the dashboard, center console, or door panel. In some cases, it may also be located on the exterior of the vehicle near the rear, typically integrated into the tailgate handle or a dedicated button.

Activating the Switch: Once located, press or activate the tailgate release switch. This can be done by pushing a button, toggling a switch, or pulling a lever, depending on the design of the switch in your vehicle.

Electrical Signal Transmission: When the tailgate release switch is activated, it sends an electrical signal through the vehicle's wiring harness to the central locking system or tailgate actuator. This signal instructs the system to unlock the tailgate.

Tailgate Unlocking: Upon receiving the signal, the central locking system or tailgate actuator releases the lock mechanism holding the tailgate closed. This allows the tailgate to be opened.

Opening the Tailgate: With the tailgate unlocked, you can now lift or open the tailgate using the designated handle or by applying pressure to the appropriate area, depending on the vehicle's design.

Closing and Locking the Tailgate: After using the tailgate, it can be closed by securely pushing it back into place. In some vehicles, the tailgate may have a soft-close feature that assists in the closing process. Once the tailgate is closed, it typically locks automatically or can be manually locked using a separate lock mechanism or the central locking system.

Comments :

What we sell as well :

FAQ :

Q1. What is your terms of packing?
A: Generally, we pack our goods in original brand boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: Ali pay, Paypal, Western Union, T/T. Payment 100% in advance. We'll show you the photos of the products and packages before the delivery.

Q3. How about your delivery time?
A: Generally, it will take 3 to 5 days after receiving your payment. The specific delivery time depends on the items and the quantity of your order.
Q4. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the shipping cost.
Q5. How can you assure your products quality?
A: We have a professional QC team with the strong sense of responsibility. We maintain tight control over production from raw materials to finish products. Every working procedure is monitored by our specialists to ensure the best quality.

Q6. How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.